Canare BCP-B53 BNC plugs

This is Canare's standard 75 ohm BNC plug for most RG-6 sized cables, including Belden 1694A and Canare L-4.5CHD. The plug is applied, preferably using Canare tooling, by first crimping the center pin to the center conductor of the cable, then adding the crimp sleeve, pushing the pin through the connector body, and crimping the sleeve over the shield braid and onto the rear of the connector body. We recommend using Canare's TS-100E strip tool for cable end prep, and the TC-1 crimp tool, with the TCD-35CA die set installed, for the crimp.